Ubiquiti PowerBeam AC Gen2 5 GHz High Performance airMAX Bridge PBE-5AC-Gen2
The Ubiquti PowerBeam 5AC Gen 2 incorporates a dish reflector design with proprietary airMAX ac technology, making this device ideal for CPE deployments requiring maximum performance.
Ubiquti PowerBeam 5AC Gen 2 Key Features
- Frequency 5 GHz
- Range 25+ km
- Highly Efficient Antenna Beam Performance
- Up to 450+ Mbps Throughput
- Dedicated Wi-Fi Radio for Management
Improved Noise Immunity
The Ubiquti PowerBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the Ubiquti PowerBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Integrated Design
Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative design, the Ubiquti PowerBeam 5AC Gen 2 is versatile and cost effective to deploy.
Plug and Play Installation
The Ubiquiti PowerBeam 5AC Gen 2 requires no tools for assembly; only a single wrench is required for pole-mounting.
General
- Dimensions 420 x 420 x 230 mm (16.54 x 16.54 x 9.06")
- Weight 2.22 kg (4.89 lbs)
- Power Supply 24V, 0.5A Gigabit PoE Adapter (Included)
- Max. Power Consumption 8.5W
- Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)
- Supported Voltage Range 20 to 26VDC
- Operating Frequency
Worldwide
2412 - 2462 MHz
5150 - 5875 MHz
USA: U-NII-1
5150 - 5250 MHz
USA: U-NII-2A
5250 - 5350 MHz
USA: U-NII-2C
5470 - 5725 MHz
USA: U-NII-3
5725 - 5850 MHz - Gain 25 dBi
- Networking Interface (1) 10/100/1000 Ethernet Port
- Processor Specs MIPS 74Kc
- Memory 64 MB
- LEDs Power, Ethernet, (4) Signal Strength
- Channel Sizes
PtP Mode 10/20/30/40/50/60/80 MHz
PtMP Mode 10/20/30/40 MHz - Enclosure Characteristics
Antenna Feed Outdoor UV Stabilized Plastic
Dish Reflector Powder-Coated SPCC - Mounting Pole-Mounting Kit (Included)
- Wind Loading 380 N @ 200 km/h (85.4 lbf @ 125 mph)
- Wind Survivability 200 km/h (125 mph)
- ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV
- Operating Temperature -40 to 70° C (-40 to 158° F)
- Operating Humidity 5 to 95% Noncondensing
- RoHS Compliance Yes
- Salt Fog Test IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
- Vibration Test IEC 68-2-6
- Temperature Shock Test IEC 68-2-14
- UV Test IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4
- Wind-Driven Rain Test ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
- Certifications CE, FCC, IC